PC Setup
Computer
Step 1 - Connect the Main (Game) Audio
Use either the USB or 3.5mm cable to connect to your PC. 3.5mm connection will only give audio, and
no voice support.
Step 2 - Connect the Microphone
Setting up the PLYR 2 as a USB Input/Output Device
The second step in connecting your new PLYR 2 is to attach the USB Chat Cable to an available USB port
on your PC. This will act as a conduit for your voice communications channel. Upon connection, your
computer will indicate that the ‘SKULLCANDY GMX Stereo Transmitter’ has been found, installed and
ready for use. The PLYR 2 is driverless and installation is automatic.
Using Windows XP
After installation, right click on the Volume icon in your system tray and open the ‘Adjust Audio
Properties’ box on your desktop. Navigate to the Voice tab, and confirm that both Voice Playback and
Voice Recording are set to the ‘SKULLCANDY GMX Stereo Transmitter’. If not, change this using the drop
down menu on each of these categories.
Next, click on the Playback tab, and confirm that your ‘Default Device’ is either set to your soundcard or
onboard audio solution for Sound Play- back. This will enable the Skullcandy GMX Stereo Transmitter to
be the default device for voice in/ out and your soundcard for game audio and give you full hardware
mixing control via the BALANCE dial.
