sks 300090, Руководство пользователя

Страница: 9 / 17

SKS-Kinkel Elektronik GmbH
EN
300090 Video compact power supply
Support-Hotline: +49 (0) 2661-98088-112 - 9 - Version: 1.0
E-Mail: support@sks-kinkel.de Document art. no. 97009500
300090 Video compact power supply
1 Installation
Electrical shock hazard to persons. Danger of burns, damage to device and malfunctions. Observe VDE 0100
and VDE 0800 guidelines during installation. (Germany)
Counter measures:

Before beginning any work, deactivate and disconnect all energized electrical wires.

Secure the switched off/ disconnected lines against erroneous reconnection.

Use a measuring device to make sure that the wires are de energized.

Cover up any adjacent, energized or conducting components.

All work and all electrical connections must comply with the national provisions for the country in question
and must be performed by appropriately trained personnel.
DIN VDE 0100 must be observed and complied with in devices with a 230V connection.
1.1 Installation instructions and protection
The unit must be connected to the power supply that the user has no direct access to the terminal area
Outside the device must be an easily accessible separator
The device complies with overvoltage category II
Außerhalb des Gerätes ist eine Überstrom-Schutzeinrichtung vorzuschalten
Install a fuse in front of the device
The device must be connected to the conductor system or the potential equalization
The device is rated to IP20 protection and it must be mounted on the DIN rail in distribution or plastic housing
The device must be installed in a fire enclosure to IEC 60950-1