SKS-Kinkel HT 4600, Руководство пользователя

Страница: 14 / 26

~ 14 ~
5. Setting Up Internal Calling
5.1 Programming Internal Call Addresses
Internal calling makes it possible to communicate between two intercom units. Using the HT4600, you
can speak with up to 6 intercom units. Buttons 1 through 6 are provided on the HT4600 for this purpose.
You place an internal call by pressing the matching button.
Intercom Unit Intercom Unit(s)
A 1
B 2
C 3
D 4
E 5
F 6
Programming Procedure for Internal Addresses:
Note:
Before the internal call addresses can be programmed, the house call address must be
programmed as described in 4.2.
Step Description
1 Set the internal call address (target address) on the DIP-Switch.
2
Push the programming button the desired internal call button within 2 seconds.
Push this combination for around 5 seconds until you hear the second signal
tone.
5.2 Deleting Internal Call Addresses
No individual internal call addresses can be deleted. When you delete, all internal call addresses stored
will always be deleted.
Hold the programming button down and push the corresponding internal call button within 2 seconds.
Deletion is completed when you hear a high-pitched tone lasting 3 seconds. Release the buttons. All call
addresses are now deleted.