DOL Extension Box
Technical User Guide
7
Extension box with 1 x I/O module (136470)
1. Connect the flat cable plug from I/O module 1 in the controller to I/O module 2 in the extension box (
A
)
2. Set the jumper OFF/ON
(C)
on the controller I/O module 1 to OFF.
3. Set the jumper OFF/ON
(D)
on the extension box I/O module 2 to ON.
Set the rotary switch of the I/O modules as follows:
I/O module 1
I/O module 2
Address = 1
Address = 2
1. Connect the extension box earthing contact
(F)
to the earthing contact of the controller
(G).
2. Route the ground cable through the lower rubber sleeve (
H
).
3. Set the CAN protocol jumper (
I
) as the main module. Set the CAN protocol jumper on the I/O module to
Classic if there is no jumper on the main module.
Extension box
Controller
Содержание DOL
Страница 2: ......
Страница 10: ...DOL Extension Box 10 Technical User Guide 4 1 Dimensioned sketch...
Страница 11: ......
