Skov DOL 530, Техническое руководство пользователя, Страница: 8 / 12

8 Technical User Guide
DOL 530/DOL 630 Extension Box
3.2 Extension box with one I/O module (136470)
1) Connect flat cable plug from
I/O module 1
in house controller to
I/O module 2
in the extension
box
(A)
.
2) Set jumper OFF/ON
(C)
on the
I/O module 1
of the house controller to OFF.
3) Set jumper OFF/ON
(D)
on the
I/O module 2
of the extension box to ON.
4) Set the I/O-modules address switch (Rotary Switch) as follows:
I/O module 1 Address = 1
I/O module 2
Address = 2
5) Connect the earthing contact of the extension box
(F)
to the earthing contact of the house controller
(G)
.
6) Run the earth cable through the lower rubber sleeve
(H)
.
7) Set CAN protocol jumper
(I)
according to the setting on the main module. If jumper does not exist
on the main module, set CAN protocol jumper on the I/O module to Classic.
0
2
1
34567
8
9
A
BCD
EF
Extension box
House controller