Skov DA 60-820 Скачать руководство пользователя страница 11

Страница: 11 / 64

DA 60-820

Technical User Guide

2.4 Inlet

434606 DA 820 duct with fan suspension, grey
434607 DA 820 duct with fan suspension, black

Duct (750 mm) with shoe for suspension of fan unit.

Supplied with fan suspension and screws.

Remember that ducts in the house must be insulated to counteract conden-
sation.

433469 DA 60-820 adapter black

Is used at the transition between DA

820 duct and DA

60-920 exhaust.

Supplied with mounting set.

Remember at adapters in the house must be insulated to counteract con-
densation.

433520 DA 60-920 outlet funnel Free Flow, black

The outlet funnel and the bottom plate are made from polyurethane with a
material thickness of 30mm to counteract condensation.

Always remember to order DA 60-920 exhaust, Free Flow, accessories
(433519).

433519 DA 60-920 exhaust Free Flow, accessories

Pulling system and wire is delivered unassembled.

433521 DA 60-920 intermediate plate, black

Is supplied complete with control levers for 150mm opening.

Approx 50% of the air is led out onto the intermediate plate which reduces
the air velocity out of the air supply unit and thus also the velocity at the
floor.

The intermediate plate is supplied unassembled.

Содержание DA 60-820

































































Результаты поиска

Содержание DA 60-820

Отзывы:

Похожие инструкции для DA 60-820

Бренды по названию

Популярные бренды

Skov DA 60-820, Техническое руководство пользователя

Результаты поиска

Содержание DA 60-820

Отзывы:

Похожие инструкции для DA 60-820

Бренды по названию

Популярные бренды