
Mounting Guide
3
135703 Power supply 24V 3A
DANSK
1
Produktbeskrivelse
Dette er en strømforsyning til 24 V 3 A.
2
Montagevejledning
2.1
Elektrisk tilslutning
Installationen, service og fejlfinding af elektrisk udstyr skal foretages af sagkyndigt
personale i henhold til gældende nationale regler, - i Europa efter EN 60204-1 og øvrige
gældende EU-regler.
Forsyningsadskiller skal monteres for hver motor og strømforsyning, så arbejde på det
elektriske udstyr kan foregå spændingsløst. Forsyningsadskiller leveres ikke af SKOV A/S.
2.2
Udskiftning af strømforsyning
1)
Afbryd strømmen til computeren
2)
Afmonter de seks lågskruer (
A
) hvorefter panelet kan løsnes
3)
Afmonter stikket (
B
)
4)
Afmonter de seks skruer (
C
) hvorefter strømforsyningen trækkes ud så langt ledningerne i
klemrækkerne (
D
) tillader
5)
Monter den nye strømforsyning
6)
Flyt ledningerne én ledning ad gangen fra defekt modul til det nye moduls klemrækker (
D
)
7)
Monter stikket (
B
) igen
8)
Monter panelet (
A
)
9)
Tilslut strømmen igen og kontroller om fejlen er væk
ENGLISH
3
Product Description
This is a power supply for 24 V 3 A.
4
Mounting Guide
4.1
Electric Connection
4.2
Replacement of Power Supply
1)
Disconnect power to the controller
2)
Dismantle the six cover screws (
A
) and loosen the panel
3)
Dismantle the plug (
B
)
4)
Dismantle the six screws (
C
) and pull out the power supply as far as the wires in the terminal
strips (
D
) allow
5)
Mount the new power supply
6)
Move the wires one at a time from the defective module to the terminal strips (
D
) of the new
module
7)
Mount the plug (
B
) again
8)
Mount the panel (
A
)
9)
Connect power again and check if the error has gone
The installation, service and troubleshooting in connection with electrical equipment must
be carried out by specialists in accordance with applicable national rules - in Europe in
accordance with EN 60204-1 and other applicable EU rules.
The installation of a supply isolator is required for each motor and power supply, so
maintenance of electrical equipment can be carried out in a dead environment. Supply
isolator is not supplied by SKOV A/S.