17
SKOPE OD400
‐
2
Electronic Controller
Service Manual
Parameters
Default Program Configuration
Factory Default Configuration of the controller is set by SKOPE to a specific
SKOPE Product. The factory default cannot be altered in the field. A label on
the controller box indicates the default program configuration number (e.g.
‘P-406’). Refer to the table below for default program configurations.
OD460 default program configurations
Only an authorised service agent should change the parameters. A label on
the top of the controller indicates the factory parameter program. Refer to the
table below for parameters included in this service manual. Refer to page 14
for information on accessing and changing the parameters.
Program number BN Set
Cabinet model and description
Page
P-405
BN1
OD400-2 perishable product
18
