2
977EA
SKOPE Bathroom Fan Heater
Introduction
Designed for easy installation, your SKOPE 977EA Bathroom Fan
Heater incorporates a unique wall-mounting hinged chassis, making
installation faster and easier. This upgraded bathroom fan heater has
been designed to cover the footprint of the previous SKOPE model.
See separate Installation Instructions for wiring options.
Safety Information
When using any electrical appliance, safety precautions should always
be observed. Read these instructions carefully, and retain for future
reference. For service, contact your nearest authorised service agent.
•
Under no circumstances should an unauthorised person open the
heater, in order to adjust the thermostat.
•
When used by, or near, young children or infirm persons, close
supervision is necessary. Young children should be supervised to
ensure that they do not play with the appliance.
•
Do NOT use this appliance other than for its intended use.
•
Use this appliance with the voltage specified on the rating label.
•
Be very careful not to touch hot surfaces or moving parts.
•
Do NOT cover the grilles or place any object or material up against
the unit, as this may block entry or exhaust of airflow.
•
Do NOT probe any opening to remove fluff. To ensure trouble-free
performance it is recommended that on a regular basis the unit be
isolated from the power supply and a vacuum cleaner used to
remove dust and fluff from the inlet and outlet grilles.
•
Regulations require that electrical work be carried out by
authorised persons. For your own safety and that of others, ensure
this is done.
•
Do NOT allow the supply cord to come into contact with heated
surfaces during operation.
•
If the supply cord becomes damaged, it must be replaced by a
SKOPE authorised service agent, or similarly qualified person, in
order to avoid a hazard.
