Skoda 2009 Yeti, Руководство пользователя

Страница: 227 / 252

Main beam light and low beam light
Fig. 184 Removing the bulb for the main
beam light and low beam light
– Switch the ignition and all lights off.
– Turn the protective cap in direction of arrow OPEN
⇒
fig. 182 and remove it.
–
Unplug plug
A
.
–
Press the wire clamps
B
down until they are released from the secured posi-
tion.
–
Remove the light bulb
C
and insert the new light bulb in such a way that the
fixing lugs of the light bulb socket fit into the recesses at the reflector.
Installation is carried out in the reverse order.
Note
We recommend that you have the headlight setting checked by a Skoda Service
Partner after replacing the light bulb.

Fog lights
Fig. 185 Removing the bulb for the fog
light
Removing the bulb for the fog light
– Switch the ignition and all lights off.
– Remove the rubber protective cap A
⇒
fig. 181 .
– Unplug plug 1 .
–
Take the faulty bulb out of the fixture
2
by pressing the light socket down-
wards and insert a new one.
–
Insert the protective cap.

Daylight driving lights
Fig. 186 Remove the bulb for daylight
driving lights
Remove the bulb for daylight driving lights
–
Switch the ignition and all lights off.
–
Remove the rubber protective cap
A
⇒
fig. 181 .
–
Unplug plug
1
.
– Take the faulty bulb out of the fixture 2 by turning in direction of arrow and
insert a new one in the reverse procedure.
– Insert the protective cap.

225 Fuses and light bulbs
Using the system Safety Driving Tips General Maintenance Breakdown assistance Technical data