2016-12-13
Model
：
CRH123
Page: 4 / 2
Edition : A
When you need a specify day alarm, you need to enter the number "- - - 30" on the bottom of the
screen.
When you need a specify date alarm, you need to enter the number, such as "12-30" at the bottom
of the screen.
When Alarm is ON
, the BB-BB - ring sounds for 10 seconds, the alarm when the screen symbol "
" flashing, press any key to stop.
Snooze function:
In the Snooze function, The symbol "SNZ" is still flashing on the screen when the alarm stopped
, snooze rings every 5minutes,total ring 6 times.
When the snooze is ringing, press any key is to stop all the after snooze function.
7. Chronograph mode
The measurement range of chronograph is 23 hours 59 minutes 59.99 seconds, when reach the
maximum, the chronograph re-count from "0"
Chronograph LAP segment timing can remember 12 groups.
When running the Chronograph:
Press D key to Start/Stop running ;When stop, press C key to zero.
When running, press C key to split counting. Press C key again to next LAP split counting.
In the split counting, press D key to stop counting ,Press C key to view the memory mode, press C key
again to continue to view the next memory.
When exit split count, hold on C key for 2 seconds to zero.
When running, press B key to return to Real Time mode, and it runs at back.
C Key
D Key
D Key
C Key
C Key
C Key
After 4s
After 4s
C Key
C Key
C Key
D Key
C Key
C Key
Hold
C Key
2s
Begin
Running
Stop
Clean
LAP1
Total time
LAP2
LAP5
LAP4
LAP3
Total Time
