BEFORE YOU BEGIN
This Pop-Up Goal is constructed with a metal spring loop and is
designed to pop open and close quickly. Use caution when opening
and closing this Pop-Up Goal. Adult assembly recommended.
» Make sure you have all of the Pop-Up Goal components, listed on cover.
» Read all setup and usage instructions carefully.
» Inspect the net to make sure there are no tears. If there are, please contact customer service toll
free at 877-225-7275. The SKLZ Pop-Up Goal includes a lifetime warranty on replacement nets.
» Make sure your area is clear of any obstructions and people as the goal could release quickly while
opening.
ASSEMBLY
STEP 1–OPENING THE GOAL
Take the goal out of the carry bag. Pull on a section of
the black frame and pull the goal open. Lay the goal face
down, logo facing the ground (not showing), as illustrated.
STEP 2–SETTING-UP THE GOAL
Assemble each support pole by fitting the male end of each section into the
female end of the other section.
Take one support pole and slide it into one of the bottom
sleeves on the base of the goal. Grab the corresponding
sleeve on the same side of the goal and pull the goal up.
Slide the top sleeve over the support pole. If needed,
adjust the length of the sleeve strap and clip the sleeves
together. Make sure to tighten the sleeve strap if it is
loose. Repeat on the other side. Stand the goal up.
STEP 3–SECURING THE GOAL
Place the goal in the desired location. Using the four provided ground stakes, secure the goal into
the ground by pushing one stake through each red loop on each corner of the pop-up goal.
Your Pop-Up Goal is now ready for use.
TOLL FREE: 877-225-7275
Important:
Connect Sleeve Strap
Support Pole Assembly
Bottom Sleeve
