SKLZ.com
STEP 2–
CONNECT THE NET TO THE FRAME
Unfold the Net (A) and slide the metal pin at the top of the net into the top of the
Tension-Tite Arm Pole. Make sure that the Kickster logo on the net is facing away from the
frame. Repeat on the other side.
Lift up the base pole to connect the gromments on the bottom of the net to each side of the
frame.
Secure the net to the frame by wrapping the velcro straps around both the Tension-Tite Arm
Poles and the Frame Base.
NOTE: Check the frame to make sure it is securely and fully assembled with the net before
securing to the ground.
STEP 3–
SECURE THE KICKSTER TO THE GROUND
Place your Kickster in the desired location. Make sure that
you are on level ground. Secure the goal into the ground
with the included Ground Stakes (D). If you are unable to
press them into the ground with your hand or foot you may
use a mallet.
NOTE: Do not use Ground Stakes on the back of the base
frame. Poles will bend and tension system will not
fuction properly.
NOTE: Care should be taken when pressing in the ground
stakes. Poles can be bent if driven too far into the
ground or hard surface.
CAUTION: Make sure the Kickster is secured into the ground
before play. During play make sure that the
Ground Stakes are secured regularly as a loose
Ground Stake may cause injury.
Grommet attachment
1.
1.
1.
2.
2.
2.
ONLY secure stakes where
indicated above.
SIDE