UNLOCKED
UNLOCKED
LOCKED
LOCKED
1.
Attach the bottom left chute (A) to top left chute (C) by placing the
knobs from part A into the openings in part (C). Once in place, slide
them into the locking position. Repeat to connect the bottom right
chute (B) and the top right chute (D).
3.
Place the assembled chute from the previous step around the ring (E)
and twist into place.
5.
Lower your height-adjustable hoop or get on a ladder. Clip the plastic
hooks onto the rim from the inside with even spacing. The net will be
on the inside of the Kick-Out.
ASSEMBLE CHUTE
ATTACH CHUTE TO RING
SETUP AND USE
2.
Connect the two pieces that were just assembled by placing the
knobs from the right side of the chute into the openings on the left
side of the chute. Once in place, slide them into the locking position.
4.
Secure the chute to the ring (E) by using the ring clips (F) and screws
(G)
. The ring clips will clip into the ring, insert screw (G) into the ring
and tighten to attach the chute. Repeat on other ring clips.
6.
Grab the lip at the bottom of the chute and rotate to the position
you’d like the ball returned to.
BOTTOM
LEFT
CHUTE
BOTTOM
RIGHT
CHUTE
TOP
LEFT
CHUTE
TOP
RIGHT
CHUTE
RING
RING CLIP (2)
SCREWS (4)
A
D
C
B
A
E
B
C
D
E
F
G
GETTING STARTED
IN THE BOX
VISIT SKLZ.COM TO LEARN MORE