Safety Information
It is important that you read the following safety information prior to us-
ing your Skiva PowerSkin IP5C.
•
To charge your IP5C, use the manufacturer’s USB charger. Using
alternate chargers may damage the device.
•
Do not attempt to charge the IP5C0 with a defective charger.
•
Keep the IP5C away from water, fire, extreme cold or extreme heat.
•
Do not use excessive force when applying the case to your mobile
device.
www.skivatech.com
Skiva PowerSkin IP5C 2000mAh
Battery Case with lightning port
3
(c) 2014 Skiva Technologies, Inc. All rights reserved. All trade names
are registered trademarks of respective manufacturers listed.
Getting started
1) Connect the IP5C to your computer with the USB connector
provided. When connected properly, the LED lamp will illuminate.
2) Observe the charging progress in the capacity indicator. The
capacity indicator light will turn green when charging is complete.
3) Disconnect the IP5C from your computer after the case is fully
charged. Leaving the device connected after the battery is fully
charged might reduce the battery’s capacity in future charges.