SKIPPER DM-D100 Installation manual Dolog replacement
Page 8 of 11
Date: 2021.03.16
INSTALL SENSOR INTO DOLOG TANK
Lift the sensor into the dolog tank Fsten with 4 x screw M10x80.
The 2 x threaded bolts M10x400 and wing nuts included in the KIT-DOLOG-T1-SA kit may
be used to lift the sensor into the dolog tank.
Raise the complete sensor with help of the 2 x wing nuts. When in upper position fasten the
2 x M10x80 mm screws.
When sensor is raised and secured with 2 x Screws M10 x 80 mm.
Remove the 2 x 400 mm threaded bolts. Fasten the next 2 x M10x80 mm screws were
threaded bolts are removed.
