11
OPERATING INSTRUCTIONS
WARNING
To reduce the risk of fire, personal injury, and product damage due to
a short circuit, never immerse your tool, battery pack or charger in
fl
uid or allow a
fl
uid to
fl
ow inside them. Corrosive or conductive
fl
uids, such as seawater,
certain industrial chemicals, and bleach or bleach-containing products, etc, can cause a short
circuit.
WARNING
If any parts are damaged or missing, do not operate this product until
the parts are replaced. Use of this product with damaged or missing parts
could result in serious personal injury.
WARNING
Do not attempt to modify this Impact wrench or create accessories
not recommended for use with this Impact wrench. Any such alteration
or modification is misuse and could result in a hazardous condition leading to possible serious
injury.
WARNING
To prevent accidental starting that could cause serious personal
injury, always remove the battery pack from the Impact wrench when
assembling parts, making adjustments, cleaning, or performing maintenance.
This cordless impact wrench must be used only with the battery packs and chargers
listed below:
Battery Pack
Charger
2Ah
4Ah
SKIL BY500101
SKIL BY519901
SKIL BY519801
SKIL QC535701
SKIL SC536501
NOTICE: Please refer to the battery and charger manual for detailed operating information.
Attaching/Detaching Battery Pack
(Fig. 2)
Lock the variable-speed trigger switch “OFF”
on the tool by placing the direction-of-rotation
(forward/center-lock/reverse) selector in the
center position before attaching or detaching
the battery pack.
To attach the battery pack:
Align the raised rib on the batter pack with the
grooves on the tool, and then slide the battery
pack onto the tool.
NOTICE: When placing the battery pack on the
tool, be sure that the raised rib on the battery
pack aligns with the groove inside the tool
and that the latches snap into place properly.
Improper attachment of the battery pack can cause damage to internal components.
To detach the battery pack:
Depress the battery-release button, located on the front of the battery pack, to release the
battery pack. Pull the battery pack out and remove it from the tool.
WARNING
Battery tools are always in operating condition. Therefore, the direc-
tion- of-rotation (forward/center-lock/reverse) selector should always
be locked in the center position when the tool is not in use or carrying it at your side.
BR
US
HL
ES
S
12
Fig. 2
Attach
Battery-Release
Button
Detach
