Skil PWRCORE 20 SR6603E-00, Руководство пользователя

Страница: 8 / 12

8
ENVIRONMENT
• Do not dispose of electric tools, batteries,
accessories and packaging together with household
waste material. The electric tools, accessories and
packaging should be sorted for environmental-
friendly recycling
! prior to disposal protect battery terminals with
heavy tape to prevent short-circuit
! perforation in sanding sheet should correspond
with perforation in sanding foot
! the dust suction requires the use of perforated
sanding sheets
! replace worn sanding sheets in time
• Dust suction
! do not use dust canister/vacuum cleaner when
sanding metal
Dust canister
7
-
empty dust canister regularly for optimal dust pick-up
performance
- remove dust canister by pulling dust canister
backwards
For using vacuum cleaner
8
- mount vacuum cleaner adaptor as illustrated
- connect vacuum cleaner hose to vacuum cleaner
adaptor
• On/off switch
- switch on/off the tool by pushing switch
1
in/out
! before the sanding surface reaches the workpiece,
you should switch on the tool
! be aware of the sudden impact when the tool is
switched on
! before switching off the tool, you should lift it from
the workpiece
• Speed control
9
For optimal sanding results on different materials
- with wheel you can set the desired sanding speed
- adjust speed to grit size used
- before starting a job, find the optimal speed and grit by
testing out on spare material
• Holding and guiding the tool
w
! while working, always hold the tool at the grey-
coloured grip area(s)
- guide the tool parallel to the working surface
- do not apply too much pressure on the tool; let the
sanding surface do the work for you
-
do not tilt the tool in order to avoid unwanted sanding
marks
- keep ventilation openings
1
uncovered
• Sanding
- the amount of material removed is determined by the
selection of the sanding sheet, the preselected sanding
speed and the applied pressure
! intensifiying the sanding pressure does not lead
to an increase of the sanding capacity, but to
increased wear of the tool and the sanding sheet
! never use the same sanding sheet for wood and
metal
APPLICATION ADVICE
• For determining the optimal grit (and speed), table
q
can
be used as reference
! always test out first on a piece of scrap material
MAINTENANCE
• This tool is not intended for professional use
• Always keep tool and cord clean (especially ventilation
openings
1
)
- remove adhering sanding dust with a brush
- remove battery from tool before cleaning