11
OPERATING INSTRUCTIONS
WARNING
To reduce the risk of fire, personal injury, and product damage due
to a short circuit, never immerse your tool, battery pack or charger in
fl
uid or allow a
fl
uid to
fl
ow inside them. Corrosive or conductive
fl
uids, such as seawater,
certain industrial chemicals, and bleach or bleach-containing products, etc, can cause a short
circuit.
WARNING
If any parts are damaged or missing, do not operate this product until
the parts are replaced. Use of this product with damaged or missing parts
could result in serious personal injury.
WARNING
Do not attempt to modify this impact driver or create accessories not
recommended for use with this impact driver. Any such alteration or
modification is misuse and could result in a hazardous condition leading to possible serious
injury.
WARNING
To prevent accidental starting that could cause serious personal
injury, always remove the battery pack from the impact driver when
assembling parts.
This cordless impact driver must be used only with the battery packs and charger listed
below:
Battery Pack
Charger
2Ah
4Ah
SKIL BY500101
SKIL BY519801
SKIL QC535701
NOTICE: Please refer to the battery and charger manual for detailed operating information.
To Attach/Detach Battery Pack
(Fig. 2)
Lock the trigger switch “OFF” on the tool by
placing the direction-of-rotation (forward/
center-lock/reverse) selector in the center
position before attaching or detaching the
battery pack.
To attach the battery pack:
Align the raised rib on the battery pack with the
grooves of the tool, and then slide the battery
pack onto the tool.
NOTICE: Make sure that the latch on the
battery pack snaps into place and that the
battery pack is secured to the tool before
beginning operation.
To detach the battery pack:
Depress the battery-release button located on the front of the battery pack to release the
battery pack. Pull the battery pack out and remove it from the tool.
Fig. 2
Attach
Battery-Release Button
Detach