Skil ME9821-00, Руководство пользователя

Страница: 15 / 80

15
NOTE: When taking a distance measurement by laser, the distance
measurement will be taken from the Distance Reference Base of
the tool which is located at the rear of the tool, as indicated by the
symbol displayed on the LCD screen.
WARNING
Do not direct the laser beam at persons or
animals and do not stare into the laser
beam yourself (even from a distance) .
Measuring length
1. Turn the tool ON. The tool will default to the Laser Measuring
Mode. Press the Main Button to turn on the laser, the laser
beam symbol will blink. After the laser is turned ON, continuous
measuring will start.
2. Aim the laser at the target you would like to measure. The current
measuring value will be displayed on the bottom line of the LCD
screen. During continuous measuring, the measuring tool can be
moved relative to the target, while the current measuring value
is updated accordingly in the bottom line of the display. In this
manner, as an example, the
user can move from a wall to a
pre-determined distance, during
which time the actual, changing
measurement will be displayed
continuously.
3. Press the Main Button
to stop the continuous
measurement. The laser is
turned off and the current
measured value is held and
displayed in the bottom line of
the LCD screen (Fig.4).
Fig. 4