Skil JS820301, Руководство пользователя

Страница: 19 / 64

19
MAINTENANCE
WARNING
To avoid serious personal injury, always remove the battery pack
from the tool when cleaning or performing any maintenance.
Service
WARNING
Preventive maintenance performed by unauthorized personnel may
result in misplacing of internal wires and components which could
cause serious hazard. We recommend that all tool service be performed by a SKIL Service
Center or Authorized SKIL Service Station.
General Maintenance
WARNING
When servicing, use only identical replacement parts. Use of any
other parts could create a hazard or cause product damage.
Periodically inspect the entire product for damaged, missing, or loose parts such as screws,
nuts, bolts, caps, etc. Securely tighten all fasteners and caps and do not operate this product
until all missing or damaged parts are replaced. Please contact customer service or an
authorized service center for assistance.
Retighten the Foot (Fig. 12)
If the foot-adjustment lever loosens during use,
set its tightness following the procedure below:
a. Place the foot-adjustment lever in the middle
position.
b. Loosen the locking screw counterclockwise
with a PH2 screwdriver.
c. Tighten the set screw finger tight
counter-clockwise with a 4mm Allen key.
d. Tighten the locking screw clockwise with a
PH2 screwdriver.
e. Tighten the foot-adjustment lever.
NOTICE: The set screw uses left-hand thread.
Cleaning
WARNING
The tool may be cleaned most effectively with compressed dry air. Always
wear safety goggles when cleaning tools with compressed air.
Ventilation openings and switch selectors must be kept clean and free of foreign matter. Do
not attempt to clean by inserting pointed objects through openings.
WARNING
Certain cleaning agents and solvents damage plastic parts. Some of
these are: gasoline, carbon tetrachloride, chlorinated cleaning solvents,
ammonia and household detergents that contain ammonia.
Storage
Store the tool indoors in a place that is inaccessible to children. Keep away from corrosive
agents.
Fig. 12
Locking Screw Set Screw