29 Wells Ave, Yonkers, NY 10701
914.963.2040 • toll-free: 800.431.2972 • www.skil-care.com
F
G
H
I
D
E
Reorder#
Description
Guarantee Unit
909350
ChairPro Sensor Pad Alarm System
(Includes: ChairPro Alarm Unit & 7” x 15” Sensor pad)
45 Days
Each
909355
ChairPro Sensor Pad Alarm System
(Includes: ChairPro Alarm Unit & 7” x 15” Sensor pad)
180 Days
Each
Cord Loop
1.
Insert enclosed cord loop through bracket hole (Illustration D).
2.
Hang from wheelchair push-handle (Illustration E).
Velcro
®
Tab
1.
Remove the second-from top screw from either the left or
right side of the wheelchair backrest.
2.
Remove grommet from screw. Place screw through eyelet
on Velcro
®
tab. Fasten screw to wheelchair backrest.
Make certain that “Hook” side faces away from the wheelchair
(Illustration F).
3.
Remove backing from Velcro
®
strip with “Loop” material. Secure
adhesive to back of alarm unit, above battery compartment cover
(Illustration G).
4.
Attach alarm unit to Velcro
®
tab (Illustration H).
CAUTION
1.
The ChairPro Sensor Pad Alarm is not a substitute for proper
supervision. Fall-risk residents/patients should be monitored regularly.
2.
Check battery each time alarm is used. If weak, replace the two AA batteries.
3.
LED should flash when patient/resident is seated on the sensor pad. If LED fails to flash, check battery.
Replace if necessary. If LED does not glow after battery is replaced, check sensor pad. Replace if necessary.
4.
If patient/resident is seated on a wheelchair cushion, place sensor pad on top of cushion. This system may not work
if sensor is placed beneath cushion.
INSTALLATION (contd.)
Sensor Pad Alarm Systems
GUARANTEES
1.
The ChairPro Safety Alarm Unit is replacement guaranteed for one year
following the date of purchase.
2.
The ChairPro sensor pads are replacement guaranteed for either 45 days or 180 days
(see guarantee imprint on sensor pad) following the date they are put into service.
That date must be noted on the pad for this guarantee to be effective.
These guarantees cover defects in materials and workmanship under conditions of normal use.
Please return defective part to dealer from whom it was purchased. The dealer will send the
defective part to Skil-Care and arrange for shipment of a replacement.
PURPOSE
The ChairPro Sensor Pad Alarm is designed to alert caregivers when a patient/resident has left or
fallen from the wheelchair.
INSTALLATION
1.
Place sensor pad on wheelchair seat as shown (Illustration I).
2.
Sensor pad connector cord is then placed through the space between the wheelchair seat and
backrest. Make certain the cord doesn’t interfere with the wheels or other moving parts.
3.
Important: If patient/resident is using a wheelchair cushion, the sensor pad must be placed on
the cushion, not under it. This system may not work if sensor pad is placed beneath a cushion.
4.
Sensor pad may be cleaned with a damp cloth and mild cleanser. Do not immerse pad in
water or cleaning solution. Do not sterilize.
5.
Inspect pad before each use. Replace if damaged.
6.
Read “Warning” on sensor pad
