Skid Steer SKID-SICKLE Скачать руководство пользователя страница 2

14/25/2006

Revision 1

Page 2 of 12

1: INTRODUCTION

Congratulations on choosing a Skid Steer Solutions Skid Sickle, Sickle Bar Mower.  This mower has been 

designed to be a cost effective way to side mow vegetation less than 2 inches in diameter.

Read this Operator’s Manual over carefully before operating or maintenance is performed on the double 

bar mower.

Become  knowledgeable  in  Safety,  Operation,  Maintenance  and  Trouble  Shooting  information.    This 

information is provided to ensure safe, trouble free operation and maintenance of the Skid Sickle.

2: SAFETY

This Safety Alert symbol means BE ALERT!  ATTENTION!  YOUR SAFETY IS INVOLVED!

This Safety Alert symbol is used throughout this Manual and on decals on your mower.  When you see 

this symbol become alert to safety information and adhere to it to prevent injury or death.

SIGNAL WORDS

There are signal words that are used in conjunction with the safety alert symbol; these signal words have 

been selected using the following guidelines:

DANGER – An immediate and specific hazard WILL result in severe personal injury or death if 

the proper precautions are not taken.  

WARNING – A specific hazard or unsafe practice which COULD result in severe personal injury 

or death if proper precautions are not taken.

CAUTION  –  Unsafe  practices  which  could  result  in  personal  injury  if  proper  practices  are  not 

taken, or as a reminder of good safety practices.

You  as  the  owner  of  a  Skid  Steer  Solutions,  Skid  Sickle  are  responsible  for  its  safe  operation  and 

maintenance.  You need to make sure anyone working with, maintaining or working around the mower is 

familiar  with  the  operation  and  maintenance  of  the  unit.    Be  alert,  know  all  safety  information  in  this 

manual and adhere to safety practices at all times.

Remember a safe operator is the key to avoiding most accidents.  Most accidents can be avoided by –

THINKING SAFETY AND WORKING SAFELY.

Содержание SKID-SICKLE













Отзывы: