Ski-Doo Skandic SWT 2013 страница 27 Скачать руководство пользователя

Страница: 27 / 135

IMPORTANT ON-PRODUCT LABELS

mmo2011-007-009_a

This vehicle is designed for one (1)

operator and as many passengers as there

are seats with straps or handgrips installed

on the vehicle conforming to SSCC

standards.

When riding with a passenger :

Braking ability and steering control are

reduced. Decrease speed and allow extra

space to maneuver.

Adjust suspensions according to weight.

REMEMBER : YOU ARE RESPONSIBLE

FOR THE SAFETY OF YOUR

PASSENGER!

ALL DRIVERS AND PASSENGERS

MUST READ THE FOLLOWING:
Avoid surprises!
BE ON THE LOOK-OUT for the
unexpected.
Operate defensively.
Scan constantly for people, objects,

conditions and upcoming vehicles.

Avoid thin ice / open water.

Use extra caution whenever off-trail.

ALWAYS wear a DOT approved

HELMET and clothing

appropriate for snowmobiling.

NEVER ride under the influence

of alcohol or drugs even as

a passenger.

516004652B

LABEL 1

BEFORE STARTING :

1. Attach tether cord to your clothing.

2. Check proper operation of the throttle and

brake levers each time before starting.

They must return to their initial position when

released.

3. Apply parking brake.

4. Turn handlebars all the way in both

directions to check for interference and

insure free operation.

AFTER STARTING :

1. Pull-out tether cord to check if engine

shuts off.

2. Re-start and push in the emergency engine

stop switch to check if engine shuts off.

3. Disengage parking brake before riding to

avoid brake fading.

Read and understand all safety labels,

operator's guide and watch your safety DVD

before operation. Operator's guide is located

either in the passenger seat or under the

driver's seat. To access guide under driver's

seat, pull front of seat cushion then pull tabto

unlock seat (if applicable, passenger's seat

needs to be removed first).

Get familiar with your vehicle.Inexperienced

riders may overlook risks and be surprised by

vehicles specific behavior and terrain

conditions.Ride slowly.

Excessive speed and reckless driving can kill !

ALWAYS adjust your speed according to

snow conditions and circumstances.

Steering control and braking ability may be

reduced on hard-pack snow, ice or roads.

Reduce speed & allow more space to stop

or turn.

Respect laws on minimum operator age.

Manufacturer recommends a minimum

operating age of 16 years old.

Never open side panels or hood while

engine is running or if vehicle is in motion.

Ensure to remove DESS key before

opening those.

516004653

LABEL 2

516004566A

516004566A

LABEL 3

This guard must ALWAYS be in place when engine is running.

Beware of rotating parts

they could cause injuries or

catch your clothing.

WARNING

516004595A

LABEL 4

________

SAFETY INFORMATION

________

Содержание Skandic SWT 2013








































































































































Результаты поиска

Содержание Skandic SWT 2013

Отзывы:

Похожие инструкции для Skandic SWT 2013

Бренды по названию

Популярные бренды

Ski-Doo Skandic SWT 2013, Руководство оператора

Результаты поиска

Содержание Skandic SWT 2013

Отзывы:

Похожие инструкции для Skandic SWT 2013

Бренды по названию

Популярные бренды