Ski-Doo Bombardier MPEM 219 700 090, Руководство пользователя

Страница: 8 / 23

MPEM PROGRAMMER GUIDE
PROGRAMMER PREPARATION
MPEM – 8
MP
EM
®
PROGRAMMER PREPARATION
PASSWORD DECAL
Gently peel off password decal from programmer
screen. Apply decal on a blank sheet and store in
a safe place.
NOTE: For security reasons the password should
not be kept with the programmer.
BATTERY INSTALLATION
From backside of programmer, remove the 2 bat-
tery cover screws. Lift up cover then install the
batteries (included).
Reinstall battery cover.
PROGRAMMER START UP
Turn on the programmer, the first screen that ap-
pears shows the current date and version (V2.3D)
of the programmer. This screen only appears for a
short time.
Next screen asks for a PASSWORD. Do not punch
password until authorization number, language
selection (optional) and password modification
(optional) have been performed.
AUTHORIZATION NUMBER
Programmer is already updated with the latest
software version 2.3. This software version needs
to be configured depending on programmer op-
tions (Sea-Doo, Ski-Doo or Sea-Doo + Ski-Doo).
To configure programmer options, dealer must
contact the nearest Service Representative to ob-
tain an authorization number.
This authorization
number is essential to configure and then op-
erate programmer.
See section OPTION (main menu
è
others) on
page 17 for the complete detailed procedure.
-
CAUTION
Ensure that batteries are properly posi-
tioned. Refer to (+) and (-) identification in
battery compartment.
A00A35A
OPTION SOFTWARE VERSION
SKI-DOO Dealer V2.3 M
SEA-DOO Dealer V2.3 D
SKI-DOO + SEA-DOO
Dealer
V2.3 P
* * * * * * * * * * * * * * * *
B O M B A R D I E R
9 7 / 0 1 / 1 5 V 2 . 3 D
* * * * * * * * * * * * * * * *
A00A4BA