Ski-Doo 2006 Mini Z Скачать руководство пользователя | Manualshive

Страница: 93 / 103

background image

3)

CONDITIONS TO HAVE WARRANTY
COVERAGE

This warranty coverage is available only on 2006 Ski-Doo snowmo-
bile purchased as new and unused by its first owner from a BRP
distributor/dealer authorized to distribute Ski-Doo products in the
country in which the sale occurred (“BRP distributor/dealer”), and
then only after the BRP specified predelivery inspection process
is completed and documented. Warranty coverage only becomes
available upon proper registration of the product by an authorized
BRP distributor/dealer. Moreover, this warranty coverage is only
available if the Ski-Doo snowmobile is purchased in the country or
union of countries in which the purchaser resides. BRP will not
honor this limited warranty to any private use owner or commercial
use owner if the preceding conditions have not been met. Such
limitations are necessary in order to allow BRP to preserve both
the safety of its products, and also that of its consumers and the
general public.

Routine maintenance outlined in the Operator’s Guide must be time-
ly performed in order to maintain warranty coverage. BRP reserves
the right to make warranty coverage contingent upon proof of proper
maintenance.

4)

WHAT TO DO TO OBTAIN WARRANTY
COVERAGE

The customer must notify a servicing BRP distributor/dealer within
two (2) days of the appearance of a defect, and provide it with
reasonable access to the product and reasonable opportunity to
repair it. The customer must also present to the authorized BRP
distributor/dealer, proof of purchase of the product and must sign
the repair/work order prior to starting the repair in order to validate
the warranty repair. All parts replaced under this limited warranty
become the property of BRP.

5)

WHAT BRP WILL DO

BRP’s obligations under this warranty are limited to, at its sole dis-
cretion, repairing parts found defective under normal use, mainte-
nance and service, or replacing such parts with new genuine Ski-
Doo parts without charge for parts and labor, at any authorized BRP
distributor/dealer during the warranty coverage period.

BRP reserves the right to improve or modify products from time to
time without assuming any obligation to modify products previously
manufactured.

__________________________

91

«
...
91
92
93
94
95
...
»

Содержание 2006 Mini Z








































































































Отзывы:

Нет отзывов

Похожие инструкции для 2006 Mini Z

1993 TRX300 TOURTRAX 300

Бренд: Honda Страницы: 158

Can-Am 450 Series

Бренд: BRP Страницы: 196

RS Venture RST90A

Бренд: Yamaha Страницы: 140

Бренд: Yamaha Страницы: 122

Бренд: Yamaha Страницы: 127

Бренд: Yamaha Страницы: 134

Бренд: Yamaha Страницы: 130

Бренд: Yamaha Страницы: 163

Бренд: Yamaha Страницы: 142

Raptor YFM7RSEZ

Бренд: Yamaha Страницы: 154

Бренд: Yamaha Страницы: 146

Бренд: Yamaha Страницы: 158

Бренд: Yamaha Страницы: 176

Raptor 700R YFM70RSPX

Бренд: Yamaha Страницы: 158

Raptor 700R YFM70RSEW

Бренд: Yamaha Страницы: 158

Raptor 250 YFM25RX

Бренд: Yamaha Страницы: 148

Бренд: Yamaha Страницы: 162

Raptor YFM660RT

Бренд: Yamaha Страницы: 186

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды