2
7) Tether Cut-Out Switch
Attach tether cord to clothing then snap tether cut-out cap over re-
ceptacle before starting engine.
To stop engine, completely pull cap from safety switch.
28) Primer Button
Pull and push button. It is not necessary when engine is warm.
To prime, activate button until a pumping resistance is felt. From this
point, pump 2 or 3 times to inject fuel in intake manifold. After prim-
ing, ensure that primer button is pushed back.
NOTE:
In very cold temperature, it is recommended to rotate primer
button 3-4 turns prior to pull it. This will eliminate the possibility of
sticking.
29) Adjustable Toeholds
Each toehold can be adjusted to suit driver's preference. Loosen
bolts, adjust then, retighten bolts to 10 N•m (89 lbf•
in
).
RIGHT SIDE SHOWN
1. Toehold
2. After adjustment retighten bolts to 10 N•m (89 lbf•
in
)
A32H0VA
2
1
MMO2000-005_A.fm Page 2 Tuesday, September 28, 1999 1:47 PM
Содержание 2000 MX Zx 440 LC
Страница 1: ......
