Seals
Bearings and
housings
Lubrication
systems
Mechatronics
Services
The Power of Knowledge Engineering
Combining products, people, and application-
specific knowledge, SKF delivers innovative
solutions to equipment manufacturers and pro-
duction facilities in every major industry world-
wide. Having expert ise in multiple competence
areas supports SKF Life Cycle Management, a
proven approach to improv ing equipment reliabil-
ity, optimizing operational and energy efficiency
and reducing total cost of ownership.
These competence areas include bearings and
units, seals, lubrication systems, mecha tronics,
and a wide range of services, from 3-D computer
modelling to cloud-based condition monitoring
and asset management services.
SKF’s global footprint provides SKF customers
with uniform quality standards and worldwide
product availability. Our local presence provides
direct access to the experience, knowledge and
ingenuity of SKF people.
!
Important information on product usage
All products from SKF may be used only for their intended purpose as described in this
brochure and in any instructions. If operating instructions are supplied with the products, they
must be read and followed.
Not all lubricants are suitable for use in centralized lubrication systems. SKF does offer an
inspection service to test customer supplied lubricant to determine if it can be used in a central-
ized system. SKF lubrication systems or their components are not approved for use with gases,
liquefied gases, pressurized gases in solution and fluids with a vapor pressure exceeding normal
atmospheric pressure (1 013 mbar) by more than 0,5 bar at their maximum permissible
temperature.
Hazardous materials of any kind, especially the materials classified as hazardous by European
Community Directive EC 67/548/EEC, Article 2, Par. 2, may only be used to fill SKF centralized
lubrication systems and components and delivered and/or distributed with the same after
consulting with and receiving written approval from SKF.
This brochure was presented to you by:
Additional brochures for further information:
1-3009-EN
Pulse generator SP/SFE 30/5, SP/SFE 30/6 GL
1-1700-5-EN Pulse monitoring unit
SKF Lubrication Systems Germany GmbH
Hockenheim Plant
2. Industriestrasse 4
68766 Hockenheim
Germany
Tel. +49 (0)6205 27-0
Fax +49 (0)6205 27-101
® SKF is a registered trademark of the SKF Group.
© SKF Group 2014
The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless prior written permis-
sion is granted. Every care has been taken to ensure the accuracy of the information contained in this publication but no liability can be
accepted for any loss or damage whether direct, indirect or consequential arising out of the use of the information contained herein.
PUB LS/P2 14145 EN
· July 2014 ·
1-3018-EN
skf.com/lubrication