SKF SFD, Руководство пользователя

Страница: 9 / 61

7. Ensure that all air line fittings are properly connected
8. CAUTION: Slowly pressurize system
9. Check air line fittings for leaks and repair as necessary
10. Observe dryer operation for proper function as described in ANNUAL INSPECTIONS /
AIRFLOW DIAGRAMS section
80 – 120 Max SFD Dryer Systems w/MLT
Mounting
1. Determine proper location for SFD as described
in “General Mounting Instructions” pg. 7
2. Install wall strut with slots against the wall and
on top
3. Mount SFD base assemblies into wall strut slots
4. Assemble inlet and outlet manifolds to base
assemblies making sure to apply an anti-seize
(included with dryer) to threads of each retainer
bolt. Inlet and outlet ports may be installed on
right or left side of dryer to accommodate hose
routing
5. Connect air lines to inlet and outlet ports of manifolds using appropriate thread sealant on air line
fittings to prevent leaks
6. Install black ¼" air line so it connects front left port of SFD control unit to left front port of SFD
auxiliary unit
7. Install ¼” air line so it connects right rear port of SFD control unit to right rear port of SFD
auxiliary unit.
8. Apply anti-seize onto muffler threads and install muffler into each exhaust port of SFD
9. CAUTION: Slowly pressurize system
10. Check air line fittings for leaks and repair as necessary
11. Observe dryer operation for proper function as described in SFD OPERATION/CYCLE section
Optional Manifold kits for MLT
619780 – 4 canister dryer systems
619785 – 6 canister dryer systems
9