23
7
The product can also be returned to the
manufacturer for disposal, in which case the
customer is responsible for reimbursing the
costs incurred.
The parts are recyclable.
8
EN
7. Start-up/ 8. Shutdown and Disposal
7. Start-up
AT
TENTION
Observe the information by the machine
manufacturer regarding the lubricants to
be used.
ATTENTION
Fill in clean lubricant only using a suitable
filling device. Contaminated lubricants
may result in system failure.
7.1 Initial start-up
The pre-lubrication metering device of the
OI-AL-SR product series is supplied ready
for operation and can be started up imme-
diately after proper assembly. Ensure that
the metering device and its connections are
properly sealed.
8. Shutdown and disposal
8.1 Temporary shutdown
To temporarily shut down the pre-lubricati-
on metering device OI-AL-SR it is necessary
to shut down the single-line centralized
lubrication system, into which the metering
device is integrated.
8.2 Final shutdown
If the product will be permanently shut
down, the local regulations and laws regar-
ding the disposal of contaminated equip-
ment must be observed.
ATTENTION
Lubricants must be used and disposed off
appropriately following the local regula-
tions and laws regarding the disposal of
lubricants.