Table or bench
mount installation
1
Select a dry location within 2 ft
(609,8 mm)
of 120 V AC electrical outlet.
2
Mount bracket (
† Fig. 1
) directly onto
table or bench.
3
Line up mounting bracket with holes on
reel light unit and insert 8 in
(203 mm)
pin (
† Fig. 2
).
4
Secure 8 in
(203 mm)
pin with
cotter pin (
† Fig. 2
).
5
Adjust ball stop (
† Fig. 3)
so light head
hangs at desired length.
6
Plug power cord into standard 120 V AC
electrical outlet.
Wall mount
installation
1
Select dry location within 2 ft
(609,8 mm)
of 120 V AC electrical outlet.
2
Mount bracket to nearest available wood
stud or sturdy wall material using
appropriate screw fasteners (
† Fig. 1)
,
leaving at least 24 in
(609.8 mm)
between
reel and edge of any wall or door frame.
Ceiling mount
installation
1
Select dry location within 2 ft
(609,8 mm)
of 120 V AC electrical outlet.
2
Mount bracket directly into closest ceiling
joist or beam reinforced ceiling
beam (
† Fig. 1
).
3
Insert reel into bracket. Use care to line up
the mounting holes (
† Fig. 2
).
4
Secure 8 in
(203 mm)
pin with
cotter pin (
† Fig. 2)
.
5
Adjust ball stop (
† Fig. 3)
so light head
hangs at desired length.
6
Plug power cord into standard 120 V AC
electrical outlet.
3
Line up mounting bracket with holes on
reel light unit and insert 8 in
(203 mm)
pin (
† Fig. 2
).
4
Secure 8 in
(203 mm)
pin with cotter pin
(
† Fig. 2
).
5
Adjust ball stop (
† Fig. 3
) so light head
hangs at desired length.
6
Plug power cord into standard 120 V AC
electrical outlet.
NOTE
Do not mount reel to any wall material
(including drywall and paneling) that cannot
support significant torsion or drag.
NOTE
Do not mount reel to drywall or any
unsupported ceiling material that cannot
support significant torsion or drag.
Fig. 1
Fig. 2
Fig. 3
3
Содержание Lincoln 91023
Страница 7: ...This page left intentionally blank 7...
