PRODUCT SPECIFICATIONS
SKF Multilog On-line System IMx-16Plus
52 (66)
SKF Multilog On-line System IMx-16Plus
User Manual
Revision Letter A
3.2.7 Digital measurement
•
Frequency range: 0,016 Hz to 20 kHz (1 cpm to 1,2 Mcpm)
o
Note that when used for order tracking, the maximum pulse frequency
is 2,5 kHz
•
Frequency accuracy: 0,05% of measurement value
(typically 0,01% up to 2,5 kHz)
•
Pulse counting
•
Configurable pulses per rev.
o
The product of pulses per rev and rotational speed is subject to the
maximum frequency range, limitation
3.2.8 Signal processing
•
Event capture mode
o
Data storage on time, associated measurement value or alarm state
o
Run cycle mode (repeated or cyclic captures)
•
Time waveform
•
Vector analysis with circular alarms
•
SKF enveloping filters I, II, III, IV
•
FFT: 100 to 6 400 lines
o
Integration/Differentiation in the frequency domain
o
Window function: Hanning
•
Customer formulated mathematical equations
•
Dynamic alarm levels, active range determined on multiple parameters
•
Data storage on time, event or alarm condition
•
Detection of sensor and cable fault
•
Watchdog and self-testing
3.2.9 Interfaces
•
The mobile data and Ethernet interfaces are alternatives and cannot be used
concurrently
•
Mobile data
o
Global GPRS and LTE (2G/3G/4G networks)
o
Auto switching between network types
o
Dedicated antenna connections provided
▪
LTE 1/2 SMA female
o
DNS lookup and NTP time synchronisation are supported
o
Firmware configurable support for micro-SIM or eSIM.
▪
Micro-SIM card holder (top end cap)
•
Ethernet:
o
RJ45,
▪
100 Mbit/s TCP/IP (one port)
▪
Auto cable detection
▪
Support for PoE, refer
o
Wi-Fi
▪
802.11n
▪
2,4 GHz band, only
▪
Open or secured networks, WPA2-PSK
▪
Dedicated antenna connection provided: Wi-Fi SMA female