Fig. 8
8
Selecting
pressure transducer
radio
button activates:
8.1 End of line
– allows use of a
second pressure transducer at end
of lube supply line to complete a
lubrication cycle.
!
Notice
Pressure hold time
option only
available when
not
using an
end of line
pressure transducer.
!
Notice
A pressure switch or transducer
must still be used at pump in
End
of Line
systems to prevent pressure
build up.
8.2 Pressure Hold Time
– Allows
lubricant pressure to dissipate in
supply line after an elapsed
amount of time.
8.3 Transducer
radio button:
·
1 to 6 V Transducer
- allows use of a
1 to 6 V transducer.
·
4 To 20 mA transducer
– allows use
of a 4 to 20 mA transducer.
8.4 Max transducer pressure
– sets
maximum pressure rating of
transducer. Software allows for
input range of:
· 0 To 4000 psi (Imperial units setting)
· 0 To 275 bar (Metric units setting)
!
Notice
If
pressure transducer
option is
selected, a
pressures
option will display
on left side menu.
11
