Page 8 of 12
•
Place cover over cylinder
Tip - to locate a retailer in your neighborhood that provides precision-filled
cylinders, visit www.bluerhino.com or call toll free 1.800.258.7466.
[Diagram of Device]
Operation
Placement
The use and installation of this product must conform to local codes. In absence
of local codes, use the
National Fuel and Gas Code, ANSI Z223.1/NFPA 54,
Storage and Handling of Liquefied Petroleum Gases, ANSI/NFPA 58 or CSA
B149.1, Natural Gas and Propane Installation Code
.
Properly positioning your SkeeterVac® SV-3501C device is important to maximizing
performance. Since the SkeeterVac® SV-3501C device attracts mosquitoes it should
be placed at least 10 metres from your living areas.
Mosquitoes typically live in areas that are shady, wet and/or moist. Determine the
primary mosquito habitat and place your SkeeterVac® SV-3501C device as close as
possible to it.
If you live in an area with consistent wind, place your SkeeterVac® SV-3501C device
upwind from the primary mosquito habitat.
CAUTION: Tipping danger. Use stakes to secure.
Once you have selected the location, secure the SkeeterVac® SV-3501C device by
placing a stake in each of the (2) front feet.
Maximum performance may require relocating your SkeeterVac® SV-3501C device
from time to time. To move, remove stakes, place your foot on the cart base and
tilt backward by holding the handle. Pull to the new location. Re-install stakes.
SkeeterVac® FineTune™: Customizing the Lure Output
The amount of Octenol your SkeeterVac® SV-3501C device dispenses is important
to maximizing performance. Some mosquito species are highly attracted to
Octenol while others are less attracted. This product contains an exclusive easy-
to-use feature that allows you to customize the amount of Octenol released to
match the species in your environment.
