8
2.
Lower the rear bar into position and push the bar over the inner pin.
3.
The outer pin will sit inside the hole on the moulding attached to the rear bar. Push the retaining pin
in place.
The wings are strong, the front wing bar
can be used for lifting the boat.
The righting rope, used when capsized, is led under the wings.
To remove wings:
Undo the retaining fast pin, pull the rear wing bar out and away from the hull.
When clear
of the 2 attachment pins, lift the rear wing bar upwards. Then slide the front of the wing outwards and away
from the hull
–
the wing should come away easily.
The wing covers are supplied fully assembled, laced together with cable ties. Should the covers need
replacing, these ties are easy to cut off and replace. Only use UV stable Nylon with at least 50Kg breaking
load.
The underside of the wing covers have orange stripes to help make the boat more easily visible when
capsized.
Содержание SKEETA 8.5
Страница 32: ...31 ...
