Super Shot JR
Assembly and Operating Manual
Assembly Instructions
A. PRE-ASSEMBLY
1. Remove all parts from the shipping boxes and inspect for any possible damage during handling. Use
the following list on to inventory the items. If any part (s) are missing, call your salesperson
immediately. If shipping damage is noted, call the trucking company making the delivery.
2. Shipping Parts Inventory
1 - Game Chassis
5 - Mini Basket Balls
1 - Manual
1 - Coin box
2 - Ticket Bins
B. ASSEMBLY
1. Adjust the levelers to make the chassis level.
2. Place the game in it’s approximate final position.
3. Unlock and open the left and right ticket dispenser covers. Unlock and open the coin door in the
front cabinet. Install tickets in the ticket holders. Route the tickets from the bins into the ticket
dispensers. Close and lock the ticket dispenser doors.
4. Remove deflated balls from the front cabinet. Inflate to 2-4 psi or 14-28 kPa. The balls must be
round and soft to avoid fast rebounds. We do NOT recommend that the balls be inflated to the
values used in normal basketballs. The balls must be squeezable. Install balls in the Back Court.
5. Plug the AC cord into a known good 110-120VAC power source. If the game does not start
activating the display, check the on/off switch on the power supply. The game is now performing it’s
power on reset tests, and will soon be ready to play or program.
Page 7 of 24
