www.skcltd.com
007-01-013 Issue B
Page 3
General Information
1) Pump Models
228-9615
pump for 120V ~ 60Hz electrical mains supply with 3pin USA mains lead
228-9620
pump for 230V ~ 50Hz electrical mains supply with 3pin UK and 2pin EU
mains leads
2) Care of the Pump
•
The pump is available in two variants for different electrical mains supplies (see table above). Do not use
the pump with electrical mains supply other than that for which it is designed.
•
Do not block the ventilation grilles at either side of the pump or the cooling fan inlet grill at the rear of the pump
during operation.
•
Do not open the pump casing when the mains supply is connected to the pump - Potential electric shock hazard.
•
A small quantity of carbon dust will be exhausted from the pump outlet in normal operation due to normal wear
of the graphite pump rotor vanes.
•
The pump case is IP20 rated, it is not rated as water or splashproof and therefore must not be used
where it is possible for water to enter the pump casing.
Warning - Failure to follow these guidelines will void the product warranty.
3) The WEEE Directive
This product is marked with the crossed out wheelie bin symbol, which identifies that it falls within the
scope of the EU Directive 2002/96/EC on waste electrical and electronic equipment (WEEE). At the end
of it’s useful life, this product must be disposed of in an environmentally sound way as detailed in the
Directive. Please contact your local distributor or SKC Ltd for further details on how to comply with the
requirements of the WEEE Directive.
