manualshive.com logo in svg

SKC AirChek 3000, Руководство по эксплуатации

Поделиться
Скачать
SKC AirChek 3000 Скачать руководство пользователя страница 34

Page 32 

210-3311M Issue G 

www.skcltd.com

4.  To save the new sample run time setting, press the   button until the ‘End’ 

screen is displayed. Press [

] to save the setting and switch to HOLD mode.

5.  Alternatively to exit the User Interface without saving the changes, press the   

button until the ‘ESC’ screen is displayed. Press [

] to switch to HOLD mode 

without saving the changes.

6.  Having successfully saved a sample run time and switched to HOLD mode, the 

elapsed run time screen will show a flashing ‘S’ and the programmed sample run 
time in minutes.

7.  Press  [

] to switch to RUN mode and start the sampling operation. The 

sample run time will count down in one minute steps.

8.  At the end of the sample run time the pump will automatically switch to HOLD 

mode, and the display will revert to showing the set sample run time.

Note:

• 

After cancelling a previously set sample run time, the elapsed run time screen will display the total sample 
run time since the run time data was last reset.

• 

If a sample run time has been set on the pump, a DataTrac program cannot be entered into the pump 

User Interface Level Two

Содержание AirChek 3000





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды