Page 4
770-300M Issue E
www.skcltd.com
General Information
1) Care of the Split2 Monitor
• Always use the correct SKC battery pack and battery charger designated for the Split2
monitor.
• Ensure that the battery pack is fully charged before use. Refer also to Care of the Battery
Pack on page 29.
• It is recommended to switch the Split2 monitor off via the push button on/off switch prior
to charging. This will result in the shortest possible charging time.
• Internal surfaces of the sensor head are coated with a matt, light absorbing finish. Failure
to observe the correct cleaning method for the sensor head as detailed in Cleaning the
Optics on pages 30/31 will cause damage to the sensor head and will impact on the
accuracy of the Split2 monitor.
Warning - Failure to follow these guidelines will void the product warranty.
2) Sampling Methods
This instruction manual provides the necessary information to set up and operate the Split2
monitor. For more detailed information on air sampling terminology, theory and sampling
methods please refer to SKC’s Step-By-Step Guide to Air Sampling (Part No. 224-G1). To
obtain a free copy please contact SKC Ltd customer services on +44 (0) 1258 480188 or
download at www.skcltd.com.
3) The WEEE Directive
This product is marked with the crossed out wheelie bin symbol, which
identifies that it falls within the scope of the EU Directive 2002/96/EC on
waste electrical and electronic equipment (WEEE). At the end of it’s useful
life, this product must be disposed of in an environmentally sound way as
detailed in the Directive. Note that the battery pack must be separated from
the Split2 monitor and disposed of as detailed in the Batteries Directive (see
below). Please contact your local distributor or SKC Ltd for further details
on how to comply with the requirements of the WEEE Directive. SKC Ltd’s
producer registration number is WEE/KH0054TQ.
4) The Batteries Directive
The NiMH battery pack supplied with this instrument and any spare battery packs purchased
for it, fall within the scope of the EU Directive 2006/66/EC on batteries and accumulators and
waste batteries and accumulators. At the end of the battery pack’s life it must be disposed
of in an environmentally sound way as detailed in the Directive. Please contact your local
distributor or SKC Ltd for further details on how to comply with the requirements of the
Batteries Directive. SKC Ltd’s batteries producer registration number is BPRN00454.