Skandika SF-2430, Руководство пользователя

Страница: 30 / 68

30
ASSEMBLY INSTRUCTIONS
STEP 5
Entfernen Sie die 4 Schrauben (23) aus der Computerrückseite (21).
Loosen the 4 screws (23) from the back of computer (21). Fix the handlebars (04) on front post (02)
with the T-type knob (14) and the cover (16). Guide the hand pulse wire (15) through the hole on top of
front post (02) out of the post. Connect upper sensor wire (17) and pulse wires (15) to the computer (21).
Fix the computer (21) to the bracket of front post (02) usning the 4 screws (23).
Mains connection
The computer gets its power supply by the included adaptor (22).
The adaptor will be connected to a normal mains plug (European standard,
please check the specifications resp. please use a fitting mains adaptor for your power system).
If you have to buy a new adaptor it is important to pay attention that it is GS approved and
corresponds to the product safety law.
Don’t use another electricity supply because this could cause damages or impairments of functions.
CHECK IF ALL BOLTS AND NUTS ARE
TIGHTENED BEFORE USING THE DEVICE!