Skandika Fitness OFFICE BIKE SF-2410, Инструкция по сборке и руководство пользователя

Страница: 15 / 20

15
GB
Step 1: Rear Support Frame Assembly
A. Remove the
Main Frame Assembly (1)
along with the
die-cut Styrofoam (A)
from
the carton.
B. Lay the
Main Frame Assembly (1)
with the
die-cut Styrofoam (A) attached on floor. See
the diagram on the left.
NOTE: Failure to use the Styrofoam as sup-
port for the main frame assembly may cause
damage to the bicycle.
C. Attach the
Rear Support Frame (2)
to the
Main Frame Assembly (1)
and secure with
two
Hex Head Bolts (M8xp1.25x50mm)
(49)
, two
Lock Washers (M8) (29)
and two
Washers (8x38x2.0t) (30)
.
Step 2: Rear Decoration Cover Assembly
A. Attach the
Rear Decoration Cover (13)
to the
Main Frame Assembly (1)
and secure with four
Screws (M4x12mm) (33)
.
B. Stand the
Main Frame Assembly (1)
upright, then remove the
die-cut Styrofoam (A)
..
Step 3: Seat Cushion & Seat Cover Assembly
A. For ease of assembly, turn the
Lower Seat Co-
ver Assembly (3)
and the
Seat Cushion (16)
upside down.
B. Place the
Lower Seat Cover Assembly (3)
onto the
Seat Cushion (16)
and secure with
two Bolts
(M8xp1.25x30mm) (40)
.
**Make sure the above parts are fully tightened before
moving on to the next page.**
ASSEMBLY INSTRUCTIONS