English 3
C-Level™ Sensor Positioning
Keep vent above water level.
hose
clamp
4 inch (10.2 cm)
minimum set level
0 inch (0 cm) liquid
level measured from
approximately this point
1 inch (2.5 cm)
minimum from bottom
of tank or from sludge
hose
clamp
Stow excess tube using a
cable tie.
Caution:
Do not overtighten
and pinch vent tube.
Do not use the hose clamp
to attach the vent tube.
Doing so will cause sensor
to fail.
cable
tie
Timed Dose
Demand Dose
high water
alarm fl oat
(recommended)
redundant
off fl oat
(recommended)
l
ag (duplex
only)
high water
alarm
lead
stop
0
high water
alarm fl oat
(recommended)
redundant off
fl oat
(recommended)
high water
alarm
timer
enable
timer
override
redundant
off
0
Float Switch Positioning
CAUTION!
If the C-Level™ sensor or fl oat
switches are not mounted and
connected correctly, the pumps
and alarm will not operate
properly.
3.5”
(9 cm)
