S k y t r a q V e n u s 6 L o c a t i o n F i n d e r K e y C h a i n 6 5 c h a n n e l s
Page 2
5.
Icons and Indicators
6.
Operations
6.1 Before you use
A-1. For the first time use Location Finder Key Chain, please charge the battery until it is fully charged. Take the USB wire and connect it to
the USB power jack with your PC, Laptop or car cigarette adaptor. This will begin to charging battery. 3.5 hours typically for charging.
A-2. Battery Status Indication
---- The blinking battery icon indicates low battery status, please recharge it.
---- Under charging mode while operating, the battery icon will show up while the device is on.
---- Under charging mode while operating, the backlight will light up while the device is off. Once Location Finder Key Chain is fully
charged the backlight will be off.
A-3. With fully charged, the operation time is up to 8 hours (average).
B. Explanation of Icons
No GPS Signal
GPS position located
Battery Status
6.2 Start to use
Once Location Finder Key Chain turns on, it will search GPS signal automatically. When GPS position located, you can start to use it.
NOTE: All GPS production only workable outdoors.
C-1 Time Display
1-1. Display Greenwich Mean Time
：
When GPS position had been located, the LED will show
Greenwich Mean Time.
1-2. Adjustment the Time Zone:
This device is able to adjust the Time Zone of worldwide, turns the
device on and pressing “Select Button” for 5 seconds, the adjustment
image will shows up. In first step,
you have to selected “plus” or “minus” by “Select Button; in next
steps, you have to pressing
“Confirm Button” on device to adjust an hour by “Select Button”, and
so on adjust for minutes.
Confirm Button
USB Power Jack
Power Switch
Select Button