9/10
Installation
Panel
Screw
Gague Plastic
Wall
Hole diamet
er 106.6 mm
■ Panel installation
Open a 120mm diameter hole on the panel to be installed, insert the product from the
front of the panel, and finally install the lug on the back, and then fix it on the panel from
the back with ST3.5x30 screws. The pressure port and the air pipe are connected reliably,
pay attention to the difference between the high and low pressure ports.
■ Embedded installation
Panel
Gauge
3 lugs
■ Accessories
Static pressure tips, plastic lug, self-modified screw, wall head, expansion tube, PU tube
Copyright © 07/2022 by SIN JIA ENTERPRISE COMPANY LIMITED. All rights reserved.
Operation Manual
Differential Pressure Controller
Model: TWM30
