“Sandwich”
Solo Platform & Shim
Using Sizzlits and Clearlits
1.
Place Sizzlits Die onto a Cutting Pad with foam side up. Place paper
over the die. Place another Cutting Pad over the paper to create a
“sandwich.” For Clearlits Die, place die over photo or material so that
the area to be cut shows through the die. Then place photo or material
and die between Cutting Pads to make “sandwich.” Place “sandwich” on
Solo Platform and Shim.
Solo Platform
Solo Shim
Clips
Cutting
Pads
Paper
Die
Tab
2.
Use the forward/reverse switch to select the proper direction. Slide
“sandwich” into the roller opening as far as it will go. Push in on the side
flaps to align the “sandwich” and gently press the motor button. When
the die “sandwich” is completely through the rollers, then and only then
is it safe to remove or handle your die and die-cut shape.