11
Maintenance
CAUTION:
The walker requires regular maintenance to uphold performance and
avoid premature wear, damage and injury.
Check the items on this chart at the indicated intervals. If any of the items are loose, worn, bent
or distorted, immediately have them checked and/or repaired by an authorized Sizewise
Technician. Frequent maintenance and servicing will improve performance between each use
and extend walker life. For long term use, the following maintenance chart should be followed:
The following is an equipment safety checklist that can be used with the maintenance chart to
maintain and service this product:
Make sure the walker operates easily and freely and all parts work smoothly.
Check for excess noise, vibration or a change in ease of use. These may be signs of a
problem such as loose fasteners, or damage to the walker.
Replacing the Hand Grip
To replace hand grip a Phillips screwdriver and a 10 mm wrench will
be required. Pull pins under the hand grip in two places. Remove the
bolts using the screwdriver and wrench under the other hand grip.
Remove the screws on either side located underneath, as indicated in
the picture. Slide the handle out of the hand grip. Replace hand grip.
Fasteners
WARNING:
Many of the screws and bolts used in the walker are special high-
strength fasteners. Contact an authorized Sizewise technician to assist if finding
the correct fasteners. If improper fasteners are used, they could result in patient
and/or user injury as well as damage to equipment or other property.
Improper fasteners may fail. Use only screws and bolts provided by an authorized Sizewise
representative.
If screws or bolts become loose, tighten them immediately.
If a problem is detected, make sure to repair or adjust the walker before using it.
Three Months
Six Months
Fasteners
X
Frame
X
Wheels
X
Legs
X
