331 Ushers Road • Ballston Lake, NY 12019 • USA • T +1 518 877 5173 • F +1 518 877 8346 • [email protected]
www.sixnet.com
QUICK START GUIDE
EnterprisePro
TM
Router
GSM R-1300-G or R-3300-G
SOFTWARE LICENSING TERMS & CONDITIONS
Most wireless carriers will require a userID, password, and APN
to be entered into the unit. See user manual at
www.sixnet.com
for additional information.
Software supplied with each Sixnet Wireless’ product remains the exclusive
property of Sixnet Wireless. Sixnet Wireless grants with each unit a
perpetual license to use this software with the express limitation that the
software may not be copied or used in any other product for any purpose.
It may not be reverse engineered, or used for any other purpose other than
in and with the computer hardware sold by Sixnet Wireless.
Figure B
: GUI:
FCC COMPLIANCE STATEMENT
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This
equipment generates uses and can radiate radio frequency energy; and if
not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference to radio
communications, in which case the user will be required to correct the
interference at their own expense. Warning: Changes or modifications to
this unit not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
You are now connected to the Management GUI.
If you should see anything other than the GUI screen shown,
please refer to the EnterprisePro
TM
Router User Manual
located at:
www.sixnet.com
.
Information to the user:
If this equipment causes interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures: In order to meet FCC emissions limits, this equipment must be
used only with cables that comply with IEEE 802.3. If necessary, the user
should consult the dealer or an experienced radio/television technician for
additional suggestions. The user may find the following booklet prepared
by the Federal Communications Commission helpful: “How to Identify and
Resolve Radio-TV Interference Problems”. This booklet is available from:
U.S. Government Printing Office, Washington, DC 20402, Stock No. 004-
000-00345-4
VERIFY CELLULAR CONNECTIVITY
Confirm the following on the GUI (
see Figure B
) after logged into
the unit:
Activation:
“Succeeded” or “Unavailable”
Connection:
“Enabled”
WARRANTY
Signal Strength has GREEN bars populated> If you see any RED
bars represented under Signal Strength, please consult the User
Manual.
Sixnet Wireless provides a limited hardware warranty for the
EnterprisePro
TM
Router, which consists of the following: This warranty is
effective for one year from the delivery date of the EnterprisePro
TM
Router
to the purchaser. The purchaser is responsible for returning the defective
unit to our factory, freight prepaid. If the EnterprisePro
TM
Router is under
warranty, Sixnet Wireless will repair it and return it, freight prepaid, via
standard shipping. If the EnterprisePro
TM
Router is not covered by the
warranty, we will notify you of the repair charges and not repair the
EnterprisePro
TM
Router without your permission. Repairs are guaranteed
for 90 days or the remainder of the warranty, whichever is longer. Buyer’s
remedies for breach of warranty shall be limited to repair or replacement
subject to adjustment as stated herein, or full or partial adjustment to
purchase price. The Sixnet Wireless EnterprisePro
TM
Routers are provided
with the following warranty: Hardware maintenance and repair is available
on a return to factory basis. After this initial period, configuration assistance
will continue to be available on a chargeable basis. Software support does
not provide for custom code. Custom changes are available as a
chargeable option. The warranty only covers items with a serial number.
Cables and adapters are not covered.
If “Unavailable” and connection “Unknown” browse to the Network
Tab -> Cellular Connection -> Configuration and input the APN in
the field labeled “Enter APN”, input username and password in
appropriate fields if supplied by your cellular carrier.
If you were unable to confirm this status on the Main page, please
refer to the User Manual for troubleshooting steps at
www.sixnet.com
.
If you are able to confirm this status, then your unit is successfully
connected to the cellular network via the Ethernet RJ45 port.
SIXNET WIRELESS TECHNICAL SUPPORT
For complete and most up-to-date warranty information go to
www.sixnet.com
If you have followed all of the instructions up to this point, have satisfied
yourself that you are not having an authentication problem, are convinced
that you have sufficient reception, and your unit is still not communicating,
then it is time to contact Sixnet Wireless Technical Support at +1 877 432
9908 available 24x7. We will be happy to assist you in getting your unit up,
running, and operational.
