SITU
LIGHTING
LightBob™ Manual
of
1
2
4527 Arnold Ave., Naples, FL 34104 • 1-800-561-0492 • www.situlighting.com
SITU
LIGHTING
Operating Instructions:
Power On and Changing Modes:
• Press the button on the back of the light head to turn the light on;
press again to turn off. The click of the button will be audible and
tactile.
• There are 3 selectable output levels (modes): High, Medium and Low.
There are two ways to change modes:
•
Lightly press and release button (but do not click) to change modes.
OR
•
Quickly turn the light “off” and back “on” to change modes.
• When LightBob™ has been on a setting for 10 or more seconds it
will record this setting to memory. Next time you turn on your
LightBob™ it will default to this setting.
Batteries (included):
• Install the included batteries with the "+" end facing the battery cap and
the "-" end facing the top of the light. Insert all three batteries into the
tube then install the battery cap: Align the metal tabs of the battery cap
with the corresponding openings in the bottom, apply light pressure
inward, and rotate clockwise to install the battery cap.
Warning:
batteries must be inserted in the correct orientation for the light to
work.
• To remove batteries, apply light pressure to the battery cap in the base
and turn counter clockwise. To reinstall, line up the metal tabs on the
battery cap with the openings in the base. Apply light pressure (batteries
compress into tube) and turn clockwise with finger. A coin or
screwdriver may also be used.
*Note:
Many wholesale clubs sell these D cell batteries for about $1.00
each.
Power Supply (included):
• LightBob™ can be used cordlessly (on battery power) or while plugged
in with the included power supply (4.5V 2.0A).
• To use LightBob™ while plugged in to an outlet, simply connect the
power supply to the DC jack at the base. LightBob™ detects that it’s
plugged in and will now run on wall power, allowing you to conserve
battery power for cordless operation.
• Batteries should be changed when LightBob™ is no longer bright
enough for your use.
*
Note:
LightBob™ is extremely energy efficient and uses only 0.5 – 4.5
watts of power.
SEE REVERSE SIDE FOR FURTHER INSTRUCTION
