To report any issues with this product, call our customer experience team at (866) 764-4111 or
email [email protected]. For more information, visit www.sitonit.net
SWITCHBACK – HOME EDITION USER GUIDE
99
CONTROLLER
INITIALIZATION / RESET
Simultaneously ress the
or
buttons for three seconds. Continue pressing until both columns are in the lowest
position. When the reset is finished, the control box makes a beep sound and the buttons can be released.
Reminders:
When reset is being conducted, the display shows “E00” in last 5mm stroke.
• When reset is finished, the display shows starting height.
• Users must conduct reset when the desk is operated at the first time.
CONTROLLER OPERATION
Press the
or
button until the desk reaches the preferred height.
SETTING THE MEMORIZED POSITION
Switchback supports, at most, four memory positions.
How to set memorized positions:
Adjust the desk to the desired height.
1. Press the preferred memory button (1 ,2 ,3 or 4), with either
or
for 2 seconds. Once the display shows P1 or
P2 or P3 or P4, the position is memorized.
2. Press and hold button 1, 2, 3 or 4 to move the desk to memorized position.
SWITCHING BETWEEN METRIC AND IMPERIAL
3. Press memory buttons 1, 2 and 4 for five seconds.
4. The digital display will show "C-I" or "C-E". If no other buttons are pushed within five seconds, the system will return to
normal operation.
5. Press the 3 button for imperial units. The display will show "E" or "I" for inches. Press the 2 button to choose metric
units. The display will show "C" for centimeters .
USER INTERFACE GUIDE
042
3-digit display
(shows height
of the desk)
memory setting
buttons
