2
/
8
Product Introduction
Thank you for purchasing the
GS816B wireless carbon monoxide (CO) alarm
. This device is a product that has been built using state-of-
the-art technology. This detector is a Z-Wave enabled device and is fully compatible with any Z-Wave enabled network and it’s security
framework.
This user guide contains important information on starting operation and using the devise. Store this user guide in a safe place for future
reference. These instructions are a part of this product – bear this in mind if you pass on this product to others.
CAUTION:
This CO alarm is designed for indoor use only. DO not expose to rain or moisture. DO not knock or drop the detector. DO not
open or tamper with the alarm as this could cause malfunction.
The alarm will not protect against the risk of carbon monoxide poisoning when the battery has drained.
Technical Parameters
Model:
GS816B
Type of apparatus:
Type A
Power Supply:
DC 3V(2pcs alkaline battery)
Recommend battery type:
GP GN15A / Raymax LR6
Sensor Type:
Electrochemical
Product life:
10 years after initial power up
Sensitivity Setting:
Conforms to EN 50291-1:2010+A1:2012 standard.
30PPM Without alarm before 120 minutes
50PPM Between 60 to 90 minutes
100PPM Between 10 to 40 minutes
300PPM Less than 3 minutes
Standby Current:
<50µA (average)
Alarm Current:
<30mA (average)
Operation Ambient Condition:
-10~+40
℃
, 30~95% non-condensing
Storage/Transport Ambient Condition:
-20~+50
℃
, 10~95% non-condensing
Alarm sound :
≥85
DB at 100cm @3.2±0.5KHz pulsing alarm
CO alarm silence:
about 5 minutes
Wireless transmission distance :
>30 meters (in open distance )
Radio Protocol: Z-Wave
Security: S2_UNAUTHENTICATED
Radio Frequency: 868.4MHz EU; 908.4MHz US; 921.4MHz ANZ; 869.2MHz RU
NOTE: This CO alarm is designed to detect carbon monoxide gas from any source of combustion. It is not designed to detect any
other gas.
Technical Information
ALARM indicator
Red LED
FAULT indicator
Yellow LED
TEST/SILENCE
button
Sounder
POWER indicator
Green LED